DTS-HAZ Digital Thermostats

Line and ambient sensing thermostats are used for maintaining proper viscosity in process temperature control or freeze protection applications. Chromalox offers a wide variety of commercial and industrial thermostats for your heat trace application. Enclosure options include NEMA 4, 4X or 7 which may be wall or pipe mounted in either Ordinary or Hazardous areas. Choose from our standard, non-indicating, bulb and capillary designs up to our industry-leading, programmable, 30 Amp SSR power switching DTS-HAZ Series. The DTS-HAZ may be pipe or wall mounted and it employs a selectable Soft Start function, AC or DC alarms, large and bright 4-digit display, comes with an RTD sensor and it is suitable for either ordinary or Class I, Division 2 areas.

The DTS-HAZ digital thermostat is a microprocessor based temperature control and power connection kit. It is used for freeze protection or process temperature maintenance of pipes or tanks protected by heat tracing products. This thermostat can be used with Constant Wattage, Mineral Insulated or Self-Regulating heating cables in Ordinary area or Class 1, Division 2 and IECEx/ATEX Zone II hazardous area locations.

This unit is designed to provide local temperature control and monitoring for heat traced pipes or tanks across a variety of industries and applications and will switch 30 amperes of current.

The DTS-HAZ provides easy programming of the temperature set point, high and low temperature alarms, the deadband, the temperature units, the soft start function and the alarm state through the front panel push buttons. LED lights are provided for indication of power to the unit, heater power on (load) and alarm status. A Fail Safe solid state alarm is included for wiring to your building management system to indicate alarm status. This alarm may be set to open or close on all alarm conditions including loss of power, high or low temperature alarm and RTD failure. Choose either the DC or the AC customer supplied voltage alarm variation. The minimum operating ambient temperature is -40°F (-40°C). This unit has programmable high and low temperature alarm set points from -80°F (-62°C) to 1150°F (621°C). For temperatures over 500˚F (260˚C) or for use with MI cables, use the High Temperature Adapter Kit.

The DTS-HAZ employs a Soft Start feature that uses a proprietary software algorithm which eliminates the inherent self-regulating in-rush current, resulting in less nuisance tripping at cold temperatures. For added flexibility, the user may disable the soft start feature for non-heat trace applications. The alarm contact may be either normally open or normally closed.

A 100 Ohm platinum RTD is provided with a 3 foot (1 m) lead resulting in flexible mounting options for the user.