Advanced SCR Power Controllers

ACPC Advanced Modular SCR Power Controller

The ACPC Advance Modular SCR Power Controller offers single phase, three phase 2-Leg, or three phase 3-Leg power control from 40A to 600A. All models feature Zero Cross and Phase Angle firing capability making the ACPC extremely versatile in the industry. Multiple input options are featured, including 0-5V, 0-10V, 0-20mA, 4-20mA, PWM, and 1Kohm to 10Kohm potentiometer signal. Programmable analog outputs are included to allow retransmission of critical process details.

C4 Advanced Multi-Loop SCR Power Controller

The C4 Series Multiple Zone SCR Power Controller manages both single phase and 3-phase industrial healing load applications which require zero cross firing modes. Load options include up to 4 independently controlled single phase loads or two 3-phase/2-Leg load or one 3-phase/3-leg load (with or without an additional single phase load).

The controller features four universal main process inputs, two digital inputs, and two configurable alarm outputs as standard to accommodate a variety of process needs. When more flexibility is required, the C4 controller can be customized with four analog inputs, and up to four configurable outputs.

Despite the four independent zones, the C4 still boasts a compact footprint, with options for either DIN rail mounting or direct panel mount.

C4-IR Advanced Multi-Loop SCR Power Controller

The C4-IR Series Multiple Zone SCR Power Controller manages both single phase and 3-phase industrial heating load applications which require zero cross, burst firing, half single cycle, and phase angle firing modes. Load options include up to 4 independently controlled single phase loads or two 3-phase/2- Leg load or one 3- phase/3-leg load (with or without an additional single phase load).

The controller features four universal main process inputs, two digital inputs, and two configurable alarm outputs as standard to accommodate a variety of process needs. When more flexibility is required, the C4-IR controller can be customized with four analog inputs, and up to four configurable outputs.

Despite the four independent zones, the C4-IR still boasts a compact footprint, with options for either DIN rail mounting or direct panel mount.

C1ZF Single Phase, Zero Cross SSR Power Controller

The C1ZF solid state relays are an ideal, low cost power control solution for switching resistive loads found applications in such as furnaces, ovens, heat treating, injection molding, thermoforming, press platens, commercial food equipment, semiconductor, lighting and drying, just to name a few.

The C1ZF power controllers feature a rugged, industrial design, touch-safe exterior and conservative, continuous service amperage ratings at 40˚C ambient. They are available in both AC and DC Voltage logic input command signals and employ zero crossover firing (gated to turn on and off at zero voltage), which keeps unwanted RFI (Radio Frequency Interference) to a minimum. Each controller comes complete with integrated heat sink, SCR thermal protection with LED indication and has USA & Canadian UL component recognition and CE conformity. Optional alarms are available for over temperature as well as load and line interrupt conditions. The C1ZF offers a digital PNP alarm output signal for logic-gated devices such as PLCs.

The C1ZF controller manages single phase loads up to 120 Amps and up to 600 VAC.

C2ZF & C3ZF, Three Phase Zero Cross SSR Power Controller

The C2ZF & C3ZF Series of solid state relays are an ideal, low cost power control solution for switching resistive loads found applications in such as furnaces, ovens, heat treating, injection molding, thermoforming, press platens, commercial food equipment, semiconductor, lighting and drying, just to name a few. Units are USA & Canadian UL listed, and carry CE conformity.

The C2ZF Series controller manages three phase, 2 leg loads up to 75 Amps and up to 600 VAC.

The C3ZF Series controller manages three phase, 3 leg loads up to 65 Amps and up to 600 VAC.