Radiant Heaters (Metal Sheathed)

Radiant heater product image: Metal Sheathed Radiant Heater
Globe Icon svg image 48 height by 48 width
Global Support

Support and spares available around the world.

Radiant Heaters (Metal Sheathed)

Chromalox offers multiple configurations of it's RAD series metal-sheath infrared radiant heater.  Each configuration offers a set of features designed to fit more specific application requirements.  So if your application requires that wiring is done at one location, we have a hair pin design with both terminals located at one end of the enclosure.  With our almost 100 years of experience, Chromalox understands that each application has a unique set of challenges.  That's why we always try to anticipate those challenges and incorporate design elements that allow for optimal use.

RAD-H Hermetically sealed Single Element Radiant Heater
U-RAD-2 Double Hairpin Element Radiant Heater

Complete, Ready-to-Connect Assembly available in various lengths to accommodate work of varying dimensions.

Movable Mounting Clamps and Bolts are supplied to accommodate many mounting configurations such as banks, tunnels and oven sections.

Process Temperature Control — Radiant heater output may be controlled with Chromalox SCR Power Controllers, Percentage Timing Input Controls and Non-Contact Temperature Sensors. 

Additional Sizes and Ratings

DU-RAD-2 Three Element Radiant Heater

Basic Unit is an extruded aluminum housing that contains one double hairpin-bent radiant heater in center, flanked by two U-shaped elements.

Movable Mounting Clamps and Bolts are supplied to accommodate many mounting configurations such as banks, tunnels and oven sections.

Terminals of end units are in end caps; center mounted terminals are enclosed in terminal box on rear of heater housing.

Process Temperature Control — Radiant heater output may be controlled with Chromalox SCR Power Controllers, Percentage Timing Input Controls and Non-Contact Temperature Sensors. 

U-RAD-LT-2 Liquid-Tight, Double-Hairpin Element Radiant Heater

Complete, Ready-to-Install and connect assembly.

Movable Mounting Clamps and Bolts are supplied to accommodate many mounting configurations such as banks, tunnels and oven sections.

Process Temperature Control — Radiant heater output may be controlled with Chromalox SCR Power Controllers, Percentage Timing Input Controls and Non-Contact Temperature Sensors.

Power Connections are made at both ends, using high-temperature wire.

U-RAD-LT Liquid-Tight, Single-Hairpin Element Radiant Heater

Complete, Ready-to-Connect Assembly available in various lengths to accommodate work of varying dimensions.

Movable Mounting Clamps and Bolts are supplied to accommodate many mounting configurations such as banks, tunnels and oven sections.

Special Protective Terminal Cover provides liquid-tight protection to terminals.

Power Connections are made at one end, using high-temperature wire.

RUTU Single Hairpin Element Radiant Heater Assembly

Broad Range of Sizes — Used alone or in combination RTU element assemblies offer same range of dimensions as type U-RAD.

Easy Assembly — Units are supplied with element support clips and support bolt and nut (requires drilled hole through reflector and housing) for changing U-RAD heating lengths and for replacing U-RAD elements. RUTU is also used by itself as a radiant heating device by many Chromalox customers.

RADD Two Element / RAD Single Element Radiant Heater

U-RAD Single Hairpin Element / S-RAD Single Element Radiant Heater

Complete, Ready-to-Connect Assembly available in various lengths to accommodate work of varying dimensions.

Movable Mounting Clamps and Bolts are supplied to accommodate many mounting configurations such as banks, tunnels and oven sections.

Process Temperature Control — Radiant heater output may be controlled with Chromalox SCR Controllers, Percentage Timing Input Controls and Non-Contact Temperature Sensors. See the Controls section of this catalog.

Additional Sizes and Ratings — Contact your Local Chromalox Sales office for price and availability.

Single Ended Wiring — Heaters may be furnished single-end wired with 18" leads as standard. Add the suffix SE to model number.

DU-RAD Single Element, Double-Hairpin Radiant Heater 

More Heated Length for limited space.

Process Temperature Control — Radiant heater output may be controlled with Chromalox SCR Power Controllers, Percentage Timing Input Controls and Non-Contact Temperature Sensors. See the Controls section of this catalog.

For New or Existing Installations — Utilization of a double-hairpin element, with terminal connections in the center of the housing, gives a heated length covering almost the entire length of the housing.

Movable Mounting Clamps and Bolts are supplied to accommodate many mounting configurations such as banks, tunnels and oven sections.

Center Mounted Terminals are enclosed in terminal box on rear of heater housing.

Request a Quote: Radiant Heaters

From high temperature gas heating to superheated steam and super-critical water processing, Chromalox is the leading partner for all process heating solutions.